Hydraulic Tools
These tools, driven by an aerial device’s hydraulic system or any other hydraulic power source, feature the following advantages:
- Safe power supply, totally insulated from ground potential.
- No need to recharge batteries.
Pruning Chainsaws with Foam-Filled
- Stuffed with polyurethane foam.
- Cutting capacity: 330 mm (13").
- Super SpoolTM for switching between open-centre and closed-centre hydraulic systems.
- Available in 2 lengths: 1,588 mm (62") and 2,248 mm (88").
- Insulated fiberglass extension tube tested at 100 kV for 5 minutes (OSHA 1910.269).
- Two-step trigger and fully covered sprocket guard.
- Rugged high torque gear motor.
- Weight: 4.4 kg (1,600 mm length) or 4.7 kg (2,200 mm length).
- Flow range: 19-30 lpm.
Long-Reach Pruning Chainsaws
- Cutting capacity: 330 mm (13").
- Super SpoolTM for switching between open-centre and closed-centre hydraulic systems.
- Available in 2 lengths: 1,588 mm (62") and 2,248 mm (88").
- Insulated fiberglass extension tube tested at 100 kV for 5 minutes (OSHA 1910.269).
- Two-step trigger and fully covered sprocket guard.
- Rugged high torque gear motor.
- Weight: 3.7 kg (1,600 mm length) or 4.1 kg (2,200 mm length).
- Flow range: 19-30 lpm.
Overhead Circular Saw
- Cutting capacity: 89 mm.
- Overall length: 2,083 mm.
- Super SpoolTM for switching between open-centre and closed-centre hydraulic systems.
- Insulated fiberglass extension tube tested at 100 kV for 5 minutes (OSHA 1910.269).
- Hand-stop collar, trigger guard, two-step trigger and branch stop.
- Rugged gear motor.
- Angular head design makes flush cuts easier and directs chips away from operator.
- Weight: 4.1 kg.
- Flow range: 15-23 lpm.
Pruning Shears
- Super SpoolTM for switching between open-centre and closed-centre hydraulic systems.
- Cut Diameter: 50 mm.
- Overall length: 2,159 mm.
- Insulated fiberglass extension tube tested at 100 kV for 5 minutes (OSHA 1910.269).
- Thermally insulated handles.
- Weight: 5.4 kg.
- Flow range: 15-23 lpm.
Dieless Crimping Tool
- No high pressure intensifier required.
- Uses 4 indentors to make crimp in a few seconds.
- Operates on both open-centre and closed-centre hydraulic systems.
- Head rotates for easy positioning and coupling to hydraulic circuit.
- Powered in both the advance and retract directions to prevent hang-ups.
- Weight: 5.8 kg.
- Operating pressure: 95-170 bar.
- Crimping force at 95 bar: 55 kN.
- Flow range: 11-34 lpm.
High-Pressure Hydraulic Control Valves for Cutters and Crimping Tools
- May be directly connected to the tool or used remotely with hoses.
- Compact.
- 4-way, 3-position valve.
- 207-275 bar return line ground dump safety valve.
- Built-in retention device.
- Weight: 1.4 kg.
- High pressure quick disconnects included (700 bar).
- Return pressure: 350 bar.
- Input Flow Range: 12-30 lpm.
Impact Wrench and Drill
- Super SpoolTM allows quick switching between open-centre and closed-centre hydraulic systems.
- Quick-change chuck.
- Weight: 3.2 kg.
- Dimensions (L x W x H): 208 x 107 x 269 mm.
- Flow range: 15-45 lpm (optimum flow range: 19-30 lpm).
- Operating pressure: 69-170 bar.
Reversible Drill / Variable Speed Reversible Drill
- Compact and lightweight.
- Super SpoolTM allows quick switching between open-centre and closed-centre hydraulic systems.
- Reversible.
- Drilling capacity: up to 13 mm diameter in steel and up to 29 mm diameter in wood.
- Key-type 13 mm chuck.
- Weight: 2.7 kg.
- Dimensions (L x W x H): 190 x 76 x 229 mm.
- Flow range: 15-30 lpm.
- RPM: 1.300 rpm a 23 lpm.
- Operating pressure: 69-170 bares.
Hydraulic Non-Conductive Hose of 2 Ways
- Certified non-conductive orange rubber.
- Double rayon braid.
- Working pressure 2,250 PSI (155 bar) tested to 75 kV/ft. for five minutes.
- Diameter: 3/8" (10,000 mm).
- Length: 10,000 FT (3,000 M).
- Type: Non Conductive, low Pressure.
- Connection: 3/8 IN NPTF Male Swivel Fittings.
- Couplers: F020195K, F020196K, F020197K, F020198K.