The Ampstik Plus is a multiple reading ammeter allows to hold up to four readings, thus eliminating the need to raise and lower the pole for each measurement.
The opening of the amp sensor is electronically closed, while external currents are electronically rejected. This sensor design enables the user to measure an individual conductor within close proximity to adjacent current carrying conductors without getting interference errors.
The current sensor is not position sensitive; just slip the Ampstik Plus over the conductor. The meter will store the current measurement within two seconds.
The backlight will automatically power on when the ambient light is low. This feature enables users to better view readings on the display in low-light situations.
The Ampstik Plus measures in every electric utility setting. Its linear current sensors accurately measure loads from 1 amp to 5000 amps, as well accurately measures in low to high voltage environments of up to 500kv.
This multiple reading ammeter is resistant to shock, water repellent, unsusceptible to flame and operates in a wide temperature environment.
Kit Includes | ||||
![]() |
||||
Description | Ampstik Plus | Wide Jaw Ampstik Plus | Wide Jaw Ampstik Plus | |
Weight | 2.15 lbs (0.97 kg) | 3.78 lbs (1.76 kg) | 3.78 lbs (1.76 kg) | |
Range of Operation | ||||
Voltage | 0-500kV | 0-69kV | 0-69kV | |
Current | 1-5000A | 1-2000A | 1-5000A | |
Sensor Opening | 2.5 in (6.35 cm) | 3.86 in (9.8 cm) | 3.86 in (9.8 cm) | |
Resolution | ||||
Amps 1-99.9A | 0.1 A | 0.1 A | 0.1 A | |
Amps 100-1999A | 1 A | 1 A | 1 A | |
Amps 2000-5000A | 0.01 kA | N/A | 2.00 kA - 5.00 kA | |
Accuracy | ± 1%, ± 2 Counts | |||
Measurements | Four Readings | |||
Frequency, 50 Hz | 47 a 53 Hz | |||
Frequency, 60 Hz | 57 a 63 Hz | |||
EEC Standards | Successfully passed international test standards indicated by CE | |||
Mechanical | ||||
Controls | Single button operation | |||
Display | 3.5 Digit Display | |||
Backlight | Automatic ambient light sensor | |||
Operating Temperature | -22° to +140° F (-30° to +60°C). Lithium battery required for temperatures below -4°F (-20°C) | |||
Hotstick Mounting | Universal chuck adapter. Hot stick not included. | |||
Housing | Shock & water resistant molded urethane | |||
Battery | 9V Alkaline or Lithium | |||
Optional accessories | Hard Carrying Case |